×
(866)205-5299
All Departments
Exterior
Interior
Performance
Drivetrain
Suspension & Steering
RV, Trailers, & Towing
Exhaust
Audio & Video
Lighting
Shop Supplies & Equipment
Powersports, ATVs/UTVs & Cycles
Marine & Watersports
My Account
My Garage

Your Garage


HornBlasters HornAir 232 Onboard Air System

By Hornblasters
Part #: HA-232
  • HornBlasters HornAir 232 Onboard Air System
  • For Honking & Light Pneumatic Use
  • Tank: 2-Gallon Tank
  • Tank Dimensions: 17" Length x 6" Diameter x 7" Height
  • Tank Weight: 10 lbs.
  • Compressor: Viair 325C Air Compressor
  • Compressor Voltage: 12 Volts DC
  • Air Flow: 1.77 CFM at Free Flow
  • Average Fill Time: 1 Min 10 Sec
  • Max Amperage: 19 Amps
  • Maximum Duty Cycle: 33% at 100 PSI
  • Maximum Working Pressure: 150 PSI
  • Compressor Dimensions: 8" Length x 4" Width x 7.05" Height
  • Compressor Weight: 6.95 lbs.
  • Pressure Switch: Weatherproof 110/150 PSI Switch
  • Pressure Switch Voltage: 12 Volts DC
  • Max Amps: 40 A
  • Stop Pressure: 150 PSI
  • Restart Pressure: 110 PSI
  • Designed for HornBlasters Shocker Horns
  • Includes: 2 Gallon Air Tank, Viair 325C Compressor, Viair 110/150 PSI Pressure Switch, Remote Mountable Intake Filter Assembly, Air Filter Cartridges, 6 ft. 3/8" Air Line (For Intake), 17 ft. of 10ga & 18ga Power Wire, Electric Solenoid Valve, HornBlasters 200 PSI Air Gauge, Brass NPT Fittings Kit w/Safety Valve & Blowoff, Wiring & Plumbing Kit, Mounting Hardware, Detailed Instructions, Earplugs

This product is no longer offered.
Have questions? Call us at 866-205-5299

Description

Wanting to get onboard air but aren’t sure where to start? HornBlasters HornAir 232 Onboard Air System is the go-to onboard air kit for many customers just getting started. It is a complete 150 PSI kit that has everything you need to get onboard air for your ride. It comes complete with all necessary fittings, including a Viair 110/150 Pressure Switch with a built-in relay, safety blow-off, air gauge, and drain cock. Unlike many other onboard air systems, this one comes with 10 and 18 gauge wire, as well as a complete wiring kit including a fuse holder. Included is a Black 2-Gallon 6 Port Air Tank, which has four ¼” ports and two ½” ports. Strategic placement of the ports allows you to install your drain cock on the bottom-most port on the tank for optimal draining no matter how the air tank is oriented. The ½” ports provide optimal airflow, preventing bottlenecking that occurs in other kits. At the heart of this system is Viair’s flagship medium-duty quick-recharging air compressor, the Viair 325C. As a fast-fill compressor, the Viair 325C can recharge the tank from 110 PSI to 150 PSI in just 1 minute and 10 seconds, all while pulling only 21 amps! This system is perfect for light pneumatic applications such as emergency tire inflation or load-leveling air springs. The separate tank and compressor unit is fully sealed and able to be mounted outside and exposed to the elements. Please note: This HornAir system is not recommended for AirChime horns. HornBlasters recommends using at least a 4-gallon tank with larger-scale train horns like the P3, P5, K3, and K5; however, this kit is perfect for HornBlasters Shocker horns and Outlaw and Bandit series horns.

Reviews

There are no reviews for this product yet.