Exterior Shop All
Interior Shop All
Performance Shop All
RV, Trailers, & Towing Shop All
Exhaust Shop All
Audio & Video Shop All
Lighting Shop All
Shop/Cleaning Supplies & Equipment Shop All
Marine & Watersports Shop All
Suspension & Steering
RV, Trailers, & Towing
Tire & Wheel
Audio & Video
Shop/Cleaning Supplies & Equipment
Powersports, ATVs/UTVs, Cycles & Outdoor Sports
Marine & Watersports
Fastway 6" FLIP Automatic Jack Foot for 2-1/4" JackBy Fastway/Equal-i-zer
Part #: 88-00-6500
- Fastway FLIP Automatic Jack Foot
- Fits 2-1/4” Manual or Electric Jacks with 2” Diameter Round or 2” Square Inner Jack Tube
- Extends Your Tongue Jack by 6"
- Max Tongue Weight: 1,400 lbs.
- Max Lift Capacity: 4,000 lbs.
- Includes Spacer Ring & Mounting Hardware
- Save Time & Effort Every Time You Tow Your Trailer
- Automatically Locks Down & Flips Up
- Saves 50 Cranks Both Up & Down
- Easily Removes for Low Clearance Situations
Have questions? Call us at 866-205-5299
The Fastway FLIP Jack Foot extends your trailer jack by six inches and saves you 50 cranks both up and down. The FLIP has twice the contact surface area than other jack feet, providing more stability for your trailer. It installs in seconds, with no tools needed for most applications, and fits nearly every 2-1/4” tongue jack – round or square. The FLIP eliminates the need to search for rocks or wood blocks to put under your trailer jack. It is the only jack foot that is completely automatic. As you extend your jack, the FLIP Jack Foot extends down, and locks into place. When you raise your jack, it automatically tucks up under the frame and out of the way. It is easily removed for low clearance situations. The 6” FLIP works best on trailers with taller decks like over the axle flat bed trailers, enclosed cargo trailers, ATV/snowmobile V-nose trailers, and newer RV travel trailers. With the trailer hitched as you usually tow: If there is more than 10” from the bottom of the outside jack tube to the ground, use a 6” tall FLIP Jack Foot. If there is 8” or 10” from the bottom of the outside jack tube to the ground, use a 4” tall FLIP Jack Foot instead (part # 88-00-4500).
There are no reviews for this product yet.